Ava 功能說明Ava features
Transfer(轉接)怎麼運作How Transfer works
兩個名字很像的設定,別搞混。Two similar-sounding settings — don't mix them up.Transfer Mode(轉接流程)決定「電話接通後怎麼走到轉接」:Direct Transfer / IVR Mode / SVR Mode。Call Method(連線方式)決定「轉接時接去哪」:Dial Transfer(撥給真人號碼)或 Streaming Transfer(接給 VoiceFusion 或 Vapi 的 AI 助理)。另外,Intent Action 裡的「Transfer to Campaign」是把對話移到另一個 Campaign,跟電話轉接無關。Transfer Mode decides how an answered call reaches the transfer: Direct Transfer / IVR Mode / SVR Mode. Call Method decides where the transfer goes: Dial Transfer (dial a human's number) or Streaming Transfer (connect to a VoiceFusion or Vapi AI assistant). Also: "Transfer to Campaign" in Intent Actions moves the conversation to another campaign — it has nothing to do with phone transfer.
圖一:電話怎麼走到轉接。Figure 1: how a call reaches the transfer.
flowchart TD
subgraph OUT["打出去:Active Dial / Schedule Call"]
O1{"在 Account Office Hours 內<br>而且不是假日?"}
O1 -->|否| O2["不撥號"]
O1 -->|是| O3["撥號,對方接起"]
end
subgraph IN["打進來:Inbound"]
I1{"找得到帳號、lead<br>和進行中的對話?"}
I1 -->|否| I2["拒接"]
I1 -->|是| I3{"在 Account Office Hours 內?"}
I3 -->|否| I4["播 Off Hour 語音後掛斷<br>不轉接"]
end
O3 --> M{"Campaign 的 Transfer Mode"}
I3 -->|是| M
M -->|Direct| D1["播開場語音<br>→ 停頓 Pause 秒數<br>→ 播 Transfer Message"]
M -->|IVR| V1["播開場語音,等對方按鍵"]
M -->|SVR| S1["目前沒有客戶使用<br>暫時棄用"]
V1 --> V2{"這個鍵有設定動作?"}
V2 -->|有| V3{"動作是 Transfer?"}
V2 -->|沒有| V4{"Campaign 有 Transfer 動作?"}
V3 -->|是| T
V3 -->|否| V6["執行其他動作<br>加入 Opt-out / 轉到其他 Campaign"]
V4 -->|有| T
V4 -->|沒有| V5["說 Thank you 後掛斷"]
D1 --> T[["進入轉接 → 見圖二"]]
flowchart TD
subgraph OUT["Outbound: Active Dial / Schedule Call"]
O1{"Within Account Office Hours<br>and not a holiday?"}
O1 -->|no| O2["Don't dial"]
O1 -->|yes| O3["Dial; lead answers"]
end
subgraph IN["Inbound"]
I1{"Account, lead and an<br>ongoing conversation found?"}
I1 -->|no| I2["Reject"]
I1 -->|yes| I3{"Within Account Office Hours?"}
I3 -->|no| I4["Play Off Hour message, hang up<br>no transfer"]
end
O3 --> M{"Campaign's Transfer Mode"}
I3 -->|yes| M
M -->|Direct| D1["Play greeting<br>→ pause N seconds<br>→ play Transfer Message"]
M -->|IVR| V1["Play greeting, wait for key press"]
M -->|SVR| S1["No customers use it<br>currently deprecated"]
V1 --> V2{"Action set for this key?"}
V2 -->|yes| V3{"Is the action Transfer?"}
V2 -->|no| V4{"Campaign has a Transfer action?"}
V3 -->|yes| T
V3 -->|no| V6["Run that action<br>Opt-out / move to another campaign"]
V4 -->|yes| T
V4 -->|no| V5["Say Thank you, hang up"]
D1 --> T[["Transfer → see Figure 2"]]
文字版(圖一)。打出去的電話(Active Dial / Schedule Call)撥號前會先檢查 Account 的 Office Hours 與假日,不在時間內就不撥。打進來的電話(Inbound)若找不到對應的帳號、lead 或進行中的對話會直接拒接;不在 Office Hours 內會播 Off Hour 語音後掛斷,不會轉接。接通後依 Campaign 的 Transfer Mode 分流:Direct 會播開場語音、停頓 Pause 秒數、播 Transfer Message 後轉接;IVR 會等對方按鍵,執行該鍵設定的 Key Press Action,按到沒設定的鍵時會改用這個 Campaign 的 Transfer 動作(也就是照樣轉接),連 Transfer 動作都沒有才說 Thank you 掛斷;SVR 目前沒有客戶使用,暫時棄用。Text version (Figure 1). Outbound calls (Active Dial / Schedule Call) check the Account's Office Hours and holidays before dialing; outside them, no dial. Inbound calls are rejected if no matching account, lead or ongoing conversation is found; outside Office Hours they play the Off Hour message and hang up — no transfer. Once connected, the Campaign's Transfer Mode decides the path: Direct plays the greeting, pauses, plays the Transfer Message, then transfers; IVR waits for a key press and runs that key's Key Press Action — an unmapped key falls back to the Campaign's Transfer action (so it still transfers), and only if there's no Transfer action at all does it say Thank you and hang up; SVR has no customers and is currently deprecated.
圖二:轉接時接去哪、之後記錄什麼。Figure 2: where the transfer goes and what gets recorded.
flowchart TD
T["進入轉接"] --> C{"Call Method<br>Campaign 覆蓋 → Account"}
C -->|Dial| D["撥給轉接號碼<br>記 transferring"]
C -->|Streaming| S["接給 AI 助理<br>VoiceFusion / Vapi"]
C -->|兩層都沒設| L{"Account 開了 VoiceFusion agent?"}
L -->|是| S2["接給 AI 助理<br>失敗時退回 Dial"]
L -->|否| D
S2 --> A1
S -->|拿不到 AI 助理連線| E["報錯,不轉接<br>不會退回 Dial"]
S -->|成功| A1["立刻記 transferring + transferred<br>此時還沒有真人接聽"]
A1 --> A2["AI 助理要求轉真人時<br>另記 agent transferring / transferred"]
D --> R{"轉接對象接起?"}
R -->|是| R1["記 transferred<br>開始計算 transfer duration"]
R -->|沒接 / 忙線 / 失敗| R2["系統不處理:不重試、不換號碼<br>報表算 Att. Transfers"]
flowchart TD
T["Transfer"] --> C{"Call Method<br>Campaign override → Account"}
C -->|Dial| D["Dial the transfer number<br>record transferring"]
C -->|Streaming| S["Connect to AI assistant<br>VoiceFusion / Vapi"]
C -->|neither level set| L{"Account has VoiceFusion agent on?"}
L -->|yes| S2["Connect to AI assistant<br>falls back to Dial on failure"]
L -->|no| D
S2 --> A1
S -->|can't reach the assistant| E["Error, no transfer<br>no fallback to Dial"]
S -->|connected| A1["Record transferring + transferred at once<br>no human has answered yet"]
A1 --> A2["If the assistant hands off to a human<br>record agent transferring / transferred"]
D --> R{"Target answers?"}
R -->|yes| R1["Record transferred<br>transfer duration starts"]
R -->|no answer / busy / failed| R2["Nothing happens: no retry, no other number<br>counts as Att. Transfers"]
文字版(圖二)。轉接時先看 Call Method:Campaign 有自己的設定就用 Campaign 的,否則用 Account 的。Dial 會撥給轉接號碼,開始撥時記一筆 transferring,對方接起時記 transferred;轉接對象沒接、忙線或失敗時系統不會重試或換號碼,報表上算「Att. Transfers(嘗試轉接)」而不算「Transfers」。Streaming 會把電話接給 AI 助理,一接上就同時記 transferring 與 transferred(此時還沒有真人接聽);之後 AI 助理若要求轉給真人,另外記 agent transferring / agent transferred。Call Method 兩層都沒設定時走舊邏輯:Account 開了 VoiceFusion agent 就接給 AI 助理(失敗時退回 Dial),沒開就用 Dial。明確設定成 Streaming 卻拿不到 AI 助理連線時,會直接報錯、不轉接,不會退回 Dial。Text version (Figure 2). The Call Method is checked first: the Campaign's own setting if it has one, otherwise the Account's. Dial calls the transfer number, recording "transferring" when dialing starts and "transferred" when the target answers; if the target doesn't answer, is busy or fails, nothing retries or tries another number, and reports count it under "Att. Transfers" rather than "Transfers". Streaming connects the call to an AI assistant and records "transferring" and "transferred" immediately (no human has answered yet); if the assistant later hands off to a human, "agent transferring / agent transferred" are recorded separately. With no Call Method at either level, the legacy logic applies: if the Account has the VoiceFusion agent on, connect to the assistant (falling back to Dial on failure); otherwise Dial. When Streaming is explicitly configured but the assistant can't be reached, the call errors out with no transfer and no fallback to Dial.
設定的使用優先順序。同一項設定在多個地方都能填時,系統用哪一個:Which setting wins. When a setting can be filled in several places, this is the one the system uses:
| 設定Setting | 優先順序(左邊優先)Priority (leftmost wins) | 都沒設時If none is set |
|---|---|---|
| Call Method(Dial / Streaming) | Campaign「Transfer」頁籤的覆蓋設定 → Account「Main」頁籤。同一層內:所有 call type 共用(ALL)→ 對應的 call typeCampaign "Transfer" tab override → Account "Main" tab. Within a level: shared for all call types (ALL) → the specific call type | 舊邏輯:Account 開了 VoiceFusion agent 就用 Streaming,否則 DialLegacy: Streaming if the Account has the VoiceFusion agent on, otherwise Dial |
| 轉接號碼Transfer number | IVR 按鍵動作裡填的號碼(僅 IVR)→ Campaign 的 Call Method → Account 的 Call Method → 舊版 Campaign 轉接號碼 → 舊版 Account 依 call type 的轉接號碼Number on the IVR key action (IVR only) → Campaign Call Method → Account Call Method → legacy Campaign transfer number → legacy Account per-call-type number | Direct 模式會報錯Direct mode errors out |
| Transfer Mode、Pause 秒數、Transfer Message、Off Working Time MessageTransfer Mode, pause seconds, Transfer Message, Off Working Time Message | 只看 Campaign「Transfer」頁籤的 Transfer SettingsCampaign "Transfer" tab Transfer Settings only | 系統預設:Direct、停頓 5 秒、「Got it, let me connect you now」System defaults: Direct, 5-second pause, "Got it, let me connect you now" |
| 語音訊息(開場語音、Off Hour 語音)Voice messages (greeting, Off Hour) | Campaign 的語音 → Account 的語音。兩層都只挑符合「Campaign 目前的 Transfer Mode」和「這通電話的 call type」的那幾則Campaign messages → Account messages. At both levels only messages matching the Campaign's current Transfer Mode and this call's type are used | 有多則時依 Weight 加權隨機挑一則With several, one is picked at random by Weight |
| IVR 按鍵動作IVR key actions | 這個鍵的設定 → Campaign 的 Transfer 動作。畫面上標示「(Scheduled Call)」,但 Active Dial 與 Inbound 也用同一張表This key's action → the Campaign's Transfer action. The table is labelled "(Scheduled Call)" but Active Dial and Inbound use it too | 說 Thank you 後掛斷Say Thank you, hang up |
| Office Hours / 假日Office Hours / holidays | 只看 AccountAccount only |
Streaming Transfer 的 Assistant ID 怎麼填。Call Method 選 Streaming Transfer 後,每個 call type(或所有 call type 共用)都要填「Assistant ID」與「Assistant Transfer Number」。Assistant ID 的格式依 Voice AI Provider 而不同,格式不對畫面會擋下不讓存:VoiceFusion 是純數字,Vapi 是 UUID 格式(8-4-4-4-12 的英數字)。Filling in the Assistant ID for Streaming Transfer. With Call Method set to Streaming Transfer, each call type (or all call types together) needs an "Assistant ID" and an "Assistant Transfer Number". The Assistant ID format depends on the Voice AI Provider, and the form won't save if it's wrong: VoiceFusion takes a plain number, Vapi takes a UUID (8-4-4-4-12 alphanumerics).
| Voice AI Provider | 格式Format | 測試用 Assistant IDTest Assistant IDs |
|---|---|---|
| VoiceFusion | 純數字Plain number | 39、40、41 |
| Vapi | UUID | 3e18692b-3d48-4684-a91d-8ca63fc2d6ab9ff56aa8-173b-4173-a549-5a521da6509d039053b5-3188-47f2-be22-ccba1977dcd1 |
以上是測試用資料,只用於測試,不要填進客戶的正式設定。These are test data — for testing only; don't use them in customers' live settings.
Account「Transfer」頁籤的 Transfer Settings 目前不會生效。The Account "Transfer" tab's Transfer Settings currently have no effect.那張卡上的 Transfer Mode、Pause Seconds、Transfer Message、Off Working Time Message 存得進去,但通話時系統不會讀,實際生效的是 Campaign「Transfer」頁籤的設定。例外:同一頁下方的 Voice Message(含 Import 匯入的),在 Campaign 沒有設語音時會被拿來用,這部分有效。另外,同一頁的 Transfer Mode 分頁只是切換顯示,不影響系統挑哪一套語音。Transfer Mode, Pause Seconds, Transfer Message and Off Working Time Message on that card are saved, but calls never read them — the Campaign "Transfer" tab is what takes effect. Exception: the Voice Messages lower on the same page (including imported ones) are used when the Campaign has none, so those do work. The Transfer Mode sub-tabs on that page only switch the view; they don't change which voice messages are picked.
轉接之後的數字。Transfer duration = 通話結束時間 − transferred 的時間;沒有 transferred(例如轉接對象沒接)就是 0。Streaming 的通話從接上 AI 助理就開始計時。這個數字用在 Conversations 的 Call Duration 篩選、Voice Message 統計的 Att. Transfers / Transfers / 2mins+、Cost 統計的 5 / 10 / 25 分鐘通話數,以及 SW 的 action report。轉接段是否錄音由 Account 的錄音設定決定(Call Method 是 Streaming 時一律錄音),從轉接對象接起後才開始錄。Numbers after the transfer. Transfer duration = call end time − "transferred" time; with no "transferred" (e.g. the target didn't answer) it's 0. For Streaming calls the clock starts when the AI assistant connects. This number drives the Conversations Call Duration filter, the Voice Message stats (Att. Transfers / Transfers / 2mins+), the Cost stats (5 / 10 / 25-minute calls) and SW's action report. Whether the transfer leg is recorded follows the Account's recording setting (always recorded when the Call Method is Streaming); recording starts once the target answers.